|
|
TThe functional building plans of the houses satisfied the requirements
for maximum comfort and meets the international standards for thermal
and noise insulation.
The Frame Houses consist of sitting room, kitchen
WC, one, two or more bedrooms, depending how big the model is.
The prefabricated wooden frame house
consist of different constructive element, which build the house
with suitable fitting between them. The base element is "sandwich
type", which consist of wooden frame filled with insulating
material - mineral wool, coated with folio at one side.
This construction guarantees enough thermal and noise insulation.
Depending from the geographical zone and the weather conditions
the panel can be worked out in different variants. The panels are
two kinds - outside and inside panels.
The panel can be coated with gypsum fiber boards made by KNAUF,
fiber board, water resist, OSB, which gives to the panel different
thickness - 80mm, 100mm, 120mm, 140mm until 260mm.
The wooden frame made of quality coniferous wood is fitted
to the panel and it has the function of air bag and increases the
thermal and noise insulation. Outside the walls of the panel can
be coated depending of the customer request with wooden paneling
(vertical, horizontal, American, Finnish imitating logs). Another
variant is mineral coating. It can be putted penopolystyrol fitted
to the panel. The inside walls can be painted or covered with wallpaper.
|
|
|
|
|
The supporting construction is built of wooden trusses with ribs.
For a double-pitched roof the area under the roof is closed by end-wall
trusses, which are coated with wooden paneling, completed with eaves
and front boards. The four-pitched roof construction is with purlin,
ribs and beams. For the roof covering can be putted tiles, Onduline,
Bardoline etc.
Between the wooden construction and the roof covering can be putted
additive hydro and thermal insulating materials - roofing paper,
wool and others.
|
|
|
Information
| building construction
)
)